Annke RTSP URL and recording on your computer
Annke cameras, NVRs and DVRs send video over RTSP to other software. The address is the device’s IP address followed by /Streaming/channels/ and a channel and stream number, and the account is admin with the password you set when you activated the device.
Annke RTSP URL format
| Address | |
|---|---|
| Camera, main stream | rtsp://DeviceIP:554/Streaming/channels/101 |
| Camera, sub stream | rtsp://DeviceIP:554/Streaming/channels/102 |
| NVR or DVR, channel 2 main stream | rtsp://DeviceIP:554/Streaming/channels/201 |
| Nova S (I41HG, I41CS) | rtsp://DeviceIP:554/H264/ch1/main/av_stream |
From Annke’s official support articles, checked November 2026. The first digits are the channel and the last two the stream: 01 is the main stream and 02 the sub stream. Annke lists DT, DN, DW and N series recorders, and S500, S300, FC200, NCK800, H800, H500, C500 and C800 cameras for this format.
Username, password and port
- Username: admin.
- Password: the password you set when you activated the device. Nova S cameras use the verification code on the camera label.
- Port: 554 by default. On an NVR, check it under Menu > Configuration > Network > More Settings.
- IP address: find it with Annke’s SADP tool or in your router’s device list.
Annke RTSP link not working?
- If the stream does not open, turn off stream encryption on the device. Annke’s guide names this as the fix when the RTSP link cannot be used.
- Keep the camera or recorder and the computer on the same router.
- To test the address, open it in VLC media player under Media > Open Network Stream. In VLC, put the account in the address: rtsp://admin:password@DeviceIP:554/Streaming/channels/101
- Battery and Wi-Fi models are not covered by Annke’s RTSP guide. Check the model’s user manual.
Or add it with ONVIF
Newer Annke cameras have ONVIF turned on by default with the admin account. On older ones, turn it on in the camera’s web page under Configuration > Network > Advanced Settings > Integration Protocol, create an ONVIF account and restart the camera. Litmus NVR then lists the camera under Found cameras, so you do not need to type the address.
Record Annke cameras in Litmus NVR
- Download the installer for Windows, Mac or Linux from the download page and run it. Litmus starts when installation finishes.
- Open Litmus in a browser on any device on the same network and create a local account. No Litmus account is needed on your network.
- Go to Settings > Cameras and click Add camera. If the camera is under Found cameras, select it. Otherwise click Add manually and paste the full address that starts with rtsp:// into Camera address.
- Enter admin and the device password in their own fields and click Check connection. A picture from the camera and its resolution appear. Name the camera, click Add camera, then Save.
- To watch from anywhere, connect your Litmus account and use the phone app or app.litmusnvr.com.
Questions
What is the default Annke RTSP port?
554. If you changed it on the recorder, use that number instead.
How do I get the stream of each NVR channel?
Change the channel digits in the address: 101 is channel 1, 201 is channel 2, 301 is channel 3. End with 02 instead of 01 for the sub stream.
Can I keep using the Annke Vision app?
Usually yes. Litmus connects as one more viewer, as long as the device accepts another connection.
Is Litmus NVR really free?
Yes. Every feature is free with no camera limit. Live View over a direct connection is unlimited on every plan. Paid plans only add relay server bandwidth for networks that block direct connections, and more cloud storage for alert photos.