Eufy RTSP setup and 24/7 recording on your computer
A eufy camera with NAS (RTSP) in its storage settings can send its video to other software. Turn it on in the eufy Security app, choose Continuous mode, and copy the RTSP address the app generates. In Event mode the stream only runs while an event is happening, which is the usual reason it seems not to work.
Turn on RTSP in the eufy Security app
- Open the camera’s settings, go to Storage and select NAS (RTSP).
- When the setup guide opens, tap Yes.
- Choose the recording mode. Continuous streams 24/7. Event streams only while an event is triggered.
- Note the username and password. The app generates them at random, and the default authentication mode is Basic.
- Copy the RTSP address the app generates at the end.
From eufy’s official guides “Device NAS / RTSP Configuration Guide” and “About NAS / RTSP”, checked November 2026. If your camera’s Storage settings have no NAS (RTSP), it does not offer RTSP.
What the eufy RTSP stream gives you
| eufy RTSP | |
|---|---|
| Video | H.264, fixed at 1080p |
| Audio | AAC-LC, 16 kHz, mono |
| Connections | Up to 4 at the same time |
| Username and password | Generated by the app. Up to 16 characters: letters, numbers and underscores. Basic or Digest |
| Address | Generated by the app. It changes if the camera’s IP address changes |
Eufy RTSP stream not working?
In Event mode the camera starts streaming only when an event such as motion, a person, a vehicle or a pet is triggered, and stops when the event ends. Between events, VLC and recording software cannot open the address. To record on your computer, choose Continuous mode.
- Give the camera a fixed (static) IP address in your router. If the router gives it a new IP, the RTSP address changes and recording stops.
- Keep the camera and the computer on the same router.
- Close other apps that use the stream. The camera accepts up to 4 connections at the same time.
- To test the address, open it in VLC media player under Media > Open Network Stream.
- If it still fails, tap Retry in the camera’s NAS (RTSP) settings to set it up again.
Record eufy cameras in Litmus NVR
- Download the installer from the download page and run it. Litmus starts when installation finishes.
- Open Litmus in a browser on any device on the same network and create a local account. No Litmus account is needed on your network.
- Go to Settings > Cameras, click Add camera, then Add manually. Paste the full RTSP address from the eufy app into Camera address. With a full address, the manufacturer field does not appear.
- Enter the username and password from the eufy app and click Check connection. A picture from the camera and its resolution appear. Name the camera, click Add camera, then Save.
- To watch from anywhere, connect your Litmus account and use the phone app or app.litmusnvr.com.
Questions
Why does my eufy RTSP stream only work sometimes?
The camera is in Event mode, which streams only while an event is happening. Choose Continuous mode in the camera’s NAS (RTSP) settings so the stream runs 24/7.
Can I play these recordings in the eufy Security app?
No. eufy says recordings saved by other software play only in that software. In Litmus NVR you watch them on the History tab.
Can I record eufy cameras on a Mac?
Yes. Litmus NVR runs on macOS 14.4 or later on Apple Silicon and Intel Macs.
Is Litmus NVR really free?
Yes. Every feature is free with no camera limit. Live View over a direct connection is unlimited on every plan. Paid plans only add relay server bandwidth for networks that block direct connections, and more cloud storage for alert photos.