If something goes wrong
Litmus NVR does not appear under discovered integrations in Home Assistant
- In Litmus, check that Home Assistant is turned on in Settings > Integrations. When it is off, the device is not shown on the network.
- Home Assistant and the device must be on the same network.
- A device installed with Docker must use host networking. Home Assistant running in Docker Desktop (Windows, macOS) may not find the device.
- Even if it does not appear, you can add it by its address from Add integration (Connecting Home Assistant).
Home Assistant shows "Litmus NVR (address): Failed to connect"
- Home Assistant cannot reach the device at that address. Home Assistant keeps retrying until it connects.
- Check that the device is on and connected to the network.
- If the device's address has changed, enter the new address with Reconfigure (When the address changes or you need to sign in again).
Litmus devices show as unavailable in Home Assistant
- When the place is stopped, every item shows as unavailable. In Litmus, click Start in Settings > Status.
- If only one camera is unavailable, check that camera's connection (Checking the Connection Status).
- If Litmus NVR is stopped. Start it and try again. appears when you change a switch, start the place and change it again.
Tapping a phone notification does not play the recording
- Check that Home Assistant address is filled in in the blueprint automation. When it is empty, the Home Assistant app opens.
- Away from home, enter an address that can be reached from outside.
- It does not open after 7 days, after the alert falls out of the latest 200 alerts, or after the device has restarted since.
- No recording plays for a camera with recording turned off.
Scanning the QR code in the Home app does not add the camera
- Check that the iPhone or iPad is on the same network as the device.
- On Windows, check that the firewall is not blocking Litmus.
- A device installed with Docker must use host networking.
- For a camera already added to another home, remove it from that home or reset its pairing first (Resetting the Apple Home pairing).
A camera shows No Response in the Home app
- In Litmus, check that Apple Home is turned on in Settings > Integrations and that the device is on.
- Away from home, a home hub (Apple TV or HomePod) is needed to connect.
- A camera deleted in Litmus stays as No Response in the Home app. Remove it in the Home app.
A camera removed from the Home app cannot be added again
- Reset that camera's pairing and add it with the new QR code (Resetting the Apple Home pairing).